User Note: You can change the order the postings are shown by clicking on the 'Set Preferences' link, from the main index window, and following the directions.
WAR Tech Board Archive
Re: J &E PISTON TO WALL CLEARANCE
Posted By: CHAMP In Response To: J &E PISTON TO WALL CLEARANCE (BRYAN)
Date: 2/21/2002 22:18
In Response To: J &E PISTON TO WALL CLEARANCE (BRYAN)
JE/SRP pistons are not a true forged piston (material wise , not forging wise) and as such does not need the clearance of one.To tight on the other hand and its even worse on the pistons/ bores etc. I personally would run 4-5 thou with these pistons just to be on the safe side.
P.S. 2 More Suggestions
Find another engine builder and get a new computer keyboard ,preferably one with a caps lock key that works.
Just my 2 cents, The CHAMP!!!!!
Messages In This Thread
WAR Tech Board Archive is maintained by WAR Administrator with WebBBS 5.11.